Xanboo XWT380, Quick Manual

Page: 2 / 7

I 2
PRODUCT DESCRIPTION ///
The XWT380 Thermostat is an innovative system designed to work with a home gateway enabling
remote access and operation of your HVAC system. The XWT380 Thermostat offers state of the
art performance and professional level reliability at cost effective prices. The fully optimized
418 MHz radio subsystem offers optimal range coverage allowing the
Thermostat to be placed
virtually anywhere.
PACKAGE CONTENTS ///
■
(1) Thermostat Base Unit
■
(1) Thermostat Display Unit
■
(1) 24 VAC Power Supply
■
(1) Wall Mounting Kit
■
(1) Installation Guide
INSTALLATION ///
The system is comprised of the Thermostat display and user interface which replaces your old
Thermostat , and the base unit which should be installed adjacent to the HVAC System.
This installation must be performed by a qualified HVAC engineer. Be sure to read the complete system
installation and operational manual.
The installer should ensure that all local wiring regulations and good practice are adhered to.
THERMOSTAT BASE UNIT
WALL MOUNTING THE THERMOSTAT DISPLAY UNIT ///
INSTALLATION
Before installing this unit:
1. Read all of the installation instructions carefully.
2. Read the User’s Manual carefully.
3. Ensure that this product is suitable for your application.
4. Ensure that wiring complies with all codes and ordinances.
5. Disconnect power to the control transformer of the HVAC to prevent electrical shock
and damage to equipment.
LOCATION
XWT380 Thermostat display unit is designed to replace your old thermostat.
However, in order to ensure accurate and reliable operation, please check that the following
criteria are met:
1. Ensure that the Thermostat is mounted between 5 and 5.5 ft above the floor level and
is at least 2 feet away from an outdoor wall.
2. Ensure that the Thermostat is located in an area where there is adequate air circulation.
3. Ensure that the Thermostat display is not mounted in an area in direct sunlight, or in
the path of heat generated by nearby appliances.
4. Ensure that it is not mounted on an outdoor wall, near a fireplace, or in the path of any air ducts.
REMOVING THE OLD THERMOSTAT
1. Disconnect the power to the control transformer.
2. Remove the cover to the existing Thermostat .
3. Disconnect the wires going to each terminal on the
Thermostat
.
4. Remove the existing plate or base from the wall if applicable.
WALL MOUNTING KIT 24 VAC POWER SUPPLY THERMOSTAT DISPLAY UNIT
MODE