Xanboo X1000 First-Time Setup Download Page 6

Users may clear this log by selected the 

‘CLEAR LOG’

 button. Old information will be cleared.

The next event trigged will appear in the event log.

SAFETY, REGULATORY, & 

SOFTWARE LICENSE INFORMATION ///

FCC ID NUMBER: OU4-XG1000 / IC: 4576A

CAUTION

Changes or modifications not expressly approved by Xanboo for compliance could void the user’s authority to operate the equipment.

FCC COMPLIANCE CLASS B DIGITAL DEVICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one of the following measures:

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

FCC DECLARATION OF CONFORMITY

Xanboo, Inc., Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility 

that the XG1000 complies with 47 CFR Parts 2 and 15 of the FCC Rules as Class B digital devices.

INDUSTRY CANADA ICES-003 STATEMENT

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

RESTRICTIONS ON USE OF WIRELESS DEVICES

In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible 

representatives  of  the  organization.  If  you  are  uncertain  of  the  applicable  policy  for  the  use  of  wireless  equipment  in  a  specific 

organization or environment, you are encouraged to ask for authorization to use the device prior to turning on the equipment.
The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of the devices included 

with this product, or the substitution or attachment of connecting cables and equipment other than specified by the manufacturer. 

Correction of interference caused by such unauthorized modification, substitution, or attachment is the responsibility of the user.

FCC CERTIFICATION

This product contains a radio transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the FCC Rules for 

intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC logo.
This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1) This device may 

not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. 
CAUTION: Exposure to Radio Frequency Radiation.
To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and any person’s body 

(including hands, wrists, feet, and ankles) must be at least 20 cm (8 in).

CANADA—INDUSTRY CANADA (IC)

The wireless radio of this device complies with RSS 210 and RSS 102 of Industry Canada.
The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system 

according to the Canadian regulations.

REGISTRATION

Register your product at:

 

http://broadbandregistration.motorola.com

WARRANTY ///

This product has a one year manufacturer’s warranty which covers parts and labor only. In the unlikely
event that you encounter a technical or quality issue, please contact Xanboo at 1.877.926.2661.  
Xanboo will replace defective units within the warranty period.

I0

9

Summary of Contents for X1000







Reviews: