www.xa.com/en
7
1
2
4
3. Reinstall the Hatch Cover of Antenna Hub and Antenna Frame Cover
In turn, install the central hatch cover, airframe head cover, 4G feeders, and airframe head cover cap
back to their original positions.
After assembly is completed, please
check if the head cover is firmly
secured to avoid accidents during
flight.
[1]: You can also find the "Wiring Guidelines for Modules" on the back of the head cover.
2. Correctly Connect the Circuits and Infusion Tubes
All the plugs of each circuit, the infusion tubes of the spray system, RTK feeders and 2.4/5.8G feeders
should be correctly connected. For instructions, see "Wiring Guidelines for Modules" on Page 8 and 9.
Refer to the left figure to insert the 2.4/5.8G
feeders into the holes.
3
[1]
Warning
Tube & Cable Connection
Reassembly of Removed Parts