www.xa.com
7
Maintenance of Screw Feeder
① Check the screw feeder for wear regularly. If the wear depth exceeds 2 mm (the original diameter is 79
mm), please replace it timely.
② Check if the cross slot is clean and free of foreign matters.
Cross Slot
Screw Feeder
Fit Quick-Release Unit
① Check if the cross slot, pipe surface, cross axle and guide rail are clean and free of foreign matters.
② Align the guides with the guide rails and insert the quick-release unit into the RevoCast system in the
same direction.
③ Adjust the angle of the screw feeder through the opening of the granule container to align the cross
slot with the cross axle. Lock the hasp securely after the quick-release unit is properly installed.
④ Connect the spreading disc signal cables and affix them to the cable holder.
Cross Axle
Cross Slot