17
Quick start guide
5. Viewing the flight state
The Spraying Status Indicator is located each of the Motor base. Each motor base has two indicators,
which represent the status of corresponding nozzle under the motor. The color of each indicator can
be adjusted in the "Plant Protection Operation" APP. Relevant definition of the state indicator is as
follows: (taking the red light as an example)
6. Viewing spraying state
THREE LIGHT FLASHING (Green)
TWO LIGHT SLOW FLASH (RED)
GPS MODE
SAFE MODE
Auto
Flight Status Indicator
ONE RED + ONE GREEN LIGHT FLASH
TWO LIGHT FLASHING (Green)
SOLID RED
QUICK FLASH PURPLE
QUICK FLASH BLUE
QUICK FLASH RED
THREE LIGHT FLASHING (RED)
WEAK GPS SIGNAL
GOOD GPS SIGNAL
Flight controller is not initiated yet
or is being preheated after being
powered on
FC Formatted / Abnormal Parameter
Abnormal power system
GPS Error
Low Precision
Abnormal sensor (Exclude IMU)
IMU Error
Low voltage Warning
Status
Manual
Normal
Low Voltage
QUICK FLASH WHITE
Spraying Status Indicator
SOLID
QUICK FLASH
SLOW FLASH
Spray system is Normal
UAV is Taking off / Landing
Spray system is Abnormal
observe interface of plant protection operation APP
The Flight Indicator indicates the status on the aircraft.
See the table below for details of the Flight Indicator:
Status description
Status description
