-7-
STEP 4 –
If the pairing process is successful, an notification will
STEP 4 – appear “Pairing successful”, and the device will be
STEP 4 – displayed on the device interface
STEP 5 – Repeat this process if the firmware update are
STEP 4 – unsuccessful
STEP 5 –
Confirm the UAV is functioning normally by selecting
STEP 5 – the UAV and Select “USE” in deployment of UAS, if it is
STEP 5 – displaying “IN USE”, the UAV is functioning normally
Note: Please be noted that pairing the aircraft requires sufficient
Operator Level
Follow the on-screen instruction and Power on the UAV, and select
the corresponding device to be paired.
7.Aircraft Operation by Control Keypad
Operators can remotely control the flight of the UAV by the Control
Keypads during the Flight Operation, Hovering or Return to Home.
When the UAV are operating the UAV by the CommBack, the Flight
Status LEDs (LED 4) will turn Green.
Directional key (1-2, 4-5)
will command the UAV to move in the
direction based on the nose of the UAV at
a speed of 2m/s.
Emergency Key (3)
Short Press the Emergency key will
command the UAV to Hover Long Press
(>2s) the Emergency key will command
the UAV to land immediately
