Xact XG2201 Instruction Manual Download Page 33

Page: 33 / 46

I. Voice Mail

This telephone enables you to store the Voice Mail Access Code number in your area. This will automatically connect you to the
Voice Mail service provider with one-touch dialing.
1. Press the

button.

2. Press the TELEPHONE KEYPAD

button.

3. Press the

button.

4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD

buttons.

5. Press and hold down the

button.

6. Press the

button to go back to STANDBY mode.

J. MSG Waiting (Message Waiting)

To turn off the Message Waiting LCD Screen indicator.
1. Press the

button.

2. Press the TELEPHONE KEYPAD

button.

3. Press the

button.

4. Press the SCROLL UP

or DOWN

button.

5. Press and hold down the

button.

6. Press the

button to go back to STANDBY mode.

IMPORTANT: The Message Waiting LCD indicator will automatically turn ON, if you have subscribed to Voice Mail message

service and if you have Visual Message Indication from your local telephone company.

FUNC

VOICE MAIL

RE/PA

SAVE

EDIT

OPER

FUNC

VOICE MAIL

FUNC

VOICE MAIL

RE/PA

SAVE

WXY

OPER

EDIT

WXY

FUNC

VOICE MAIL

Caller ID System Operation

IMPORTANT

In order to utilize the Caller ID feature, you must subscribe to Caller ID service

from your local telephone company.

Summary of Contents for XG2201















































Search results

Summary of Contents for XG2201

Reviews:

Related manuals for XG2201

Brands by name

Popular brands

Xact XG2201, Instruction Manual

Search results

Summary of Contents for XG2201

Reviews:

Related manuals for XG2201

Brands by name

Popular brands