8
Basic Operation
Receiving Calls with the HANDSET on the BASE UNIT
1.
When the phone rings, lift the
HANDSET
.
The IN USE LED indicator will light up.
NOTE
: The
HANDSET
RINGER ON/OFF
switch must be in the “ON” position for
ringer to operate.
2.
Start your conversation.
3.
To end your conversation, either press the
button or place the
HANDSET
on
the
BASE UNIT
. If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE, you
activate the automatic STANDBY feature.
Receiving Calls with the HANDSET off the BASE UNIT
1.
When the phone rings, press the
button. The IN USE LED indicator will light up.
2.
Start your conversation.
3.
To end your conversation, either press the
button or place the
HANDSET
on the
BASE
UNIT
. If you place the
HANDSET
on the
BASE UNIT
CHARGE CRADLE, you activate the
automatic STANDBY feature.
Storing Numbers
1.
Be sure the
BASE UNIT
IN USE LED
indicator is off and the
HANDSET
is in
STANDBY mode (See Special Features
Section).
2.
Press the
button.
3.
Dial the number you want to store.
4.
Press the
button again.
5.
Dial the TELEPHONE KEYPAD ~
button where you want to store that
number. You will hear one confirmation
“beep.”
6.
Repeat steps 1 through 5 to store other
telephone numbers.
TALK
0
9
TALK
TALK
MEMO
MEMO
5
2, 4