REGISTER
A
HANDSET
T
O
A
B
ASE
Register a handset to a base
(1) Press and hold the button on the base station for 3 seconds.The indicator light on
the base will flash to show the registration process has begun. The base station is able to
accept registration from a handset within 60 seconds. If no key is pressed within 10 seconds,
the registration procedure will be aborted.
(2) At the handset, press
Menu
the scroll down to
Registration
then press
Select
.
(3) Press
Select
again to choose
Register Handset
.
(4) Scroll to select the
Base
and press
Select
.
(5) Enter the system PIN (the default setting is
0000
) and press
OK
to start registration.
If the base is found and the PIN is correct, the unused handset numbers will be shown and
you can select a handset number by entering the number directly.
If the PIN is incorrect,
Incorrect PIN
will be displayed and the handset returns to standby
mode.
A long confirmation tone is emitted to indicate successful registration and the screen displays
Handset Registered
before returning to standby mode.
If the registration fails, the display shows
Registration Unsuccessful
.Try repeating the regis-
tration process.
If registration is unsuccessful make sure that there are not 5 handsets already registered to
the base. If there are, you must unregister one of the handsets in order to register the new
one.
49
x
