0
1
Chapter 5
Basic operation
› Setting
System settings
› See chapter 10
› USB mode when connected to a computer
The USB mode is automatically activated when the MP3
player is connected, via USB cable, to a computer. The MP3
player will turn on automatically (power supply via USB).
The buttons on the MP player will not function when
the player is in a USB mode. The MP player works like a
conventional USB memory flash drive or like an USB hard
drive.
To choose either a „Music”, „Voice”, „Setting” or „Record”
mode please proceed as follows:
Keep the MODE (10) button pressed down long enough
(approx. 2 sec.) until the modes „Music”, „Voice”, „Setting”
and „Record” are displayed.
In case the MP3 player has been turned off during
one of these operational modes, once turned on
again, this mode will automatically be restored.
› After the main menu has been displayed, navigate with
the PREVIOUS (9) and NEXT (8) buttons to choose the
desired mode.
› Confirm by pressing the MODE (10) button down shortly.
Volume regulation
Use the VOL– (2) and VOL+ (3) buttons found on the left
hand side of the player to adjust the volume when listening
to music or when recording with the microphone.
There are a total of 32 different levels to choose from
(0 – 31).
Chapter 5
Basic operation
