20
21
› Turn your CD-2000ME on and select this as your signal source. The device will start searching for
a CD in the CD compartment. If no CD can be found, then the device will switch over and search
the USB connection for a data medium. If nothing can be found there as well, then the words „NO
DISC” will appear on display.
› Should a CD and storage medium be inserted into the disc compartment and USB connection
at the same time, then the inserted CD will be chosen as the active medium. Press and hold the
CD DISPLAY/USB button for approximately two seconds to switch between a CD and USB mode.
Turning ON/OFF
› Press the POWER button on the device to turn your CD-2000ME on and off.
› Press the CD STANDBY button on the remote control to exit a standby mode and enter an active
mode.
› A blue control LED lights up when the device is in a standby mode.
› Press this button once again to return to a standby mode.
Inserting a CD
› Press the
/
n
or button to open the CD compartment. Insert a CD into the tray with the
label facing upwards. Press the
/
n
or button again to close the CD compartment. The de-
vice will start reading the inserted disc. The number of songs (up to 999) and the total playing
time on a music CD (mm:ss) will appear on display. All MP3 and WMA files found on the disc will
be summarized. 120 mm and 80 mm discs can be used for playback.
› Ensure that 80 mm discs are centered exactly. Press the CD DISPLAY/USB button when playing
a music CD to display the current song’s playing time, remaining playing time and the CDs cur-
rent total playing time and the total remaining time left.
Chapter 8
CD and MP3 playback
Chapter 8
CD and MP3 playback
Connecting an USB medium
Insert a USB flash drive carefully into the CD player’s USB connection. Change to a USB mode by
pressing the CD DISPLAY/USB button. The device will start reading the connected storage medi-
um. The total number of songs (up to 999) will appear on display. All MP3 and WMA files found
on the storage medium will be summarized.
Note
The storage medium must be formatted to FAT32. USB flash drives with capacities of up to 32 GB
will be recognized. Hard disks up to 1 TB will be recognized. The root folder will be used on both
storage mediums. Please note that USB cables connected must be less than 3 m in length in or-
der to maintain EMC compliance. Using cables longer than 3 m could influence electromagnetic
compatibility, which could lead to disturbance or failure.
Playback
Press the
u
/ button to start playback. Press the
u
/ button again to pause and a third time
to resume playback. Press the
/
n
or
n
button to stop playback.
You can also input a song number directly by using the numerical buttons on the remote con-
trol. Select the number of your song as follows:
1. Select a number for the first field
2. Press the 10+ button and then the corresponding number. Repeat this step where necessary.
3. Wait a moment. The device will skip to the selected song and begin playback.
For example:
Pressing “5” › “10+” › “3” switches over to song number 53.
Please note that the order in which songs are sorted may not necessarily have the same sort
order as you are accustomed to from other devices.
Forward
Press the
uu
button on the device or the
uu
/
uu
button on the remote control to skip to
the next song. To start a fast forward scan, press either the
uu
on the device or the
uu
/
uu
8
CD and MP3 playback
