19
clean. Never use any abrasive or harsh cleaning agents
(e.g. alcohol, petrol or thinners) as these could damage the
controls, casing, accessories or any markings and labels
found on the device.
DANGER!
Short-circuit hazard! A short-circuit could be
caused if moisture enters the product.
»
Never immerse the product into water.
»
Take care that no liquids enter the casing of the product
Installation
DANGER!
Disregarding can cause material damage.
Inappropriate placement can damage the product and its
components. Considering the large number of different types
of varnishes and polishes used for furniture, it is possible that
the device will leave visible residue on the furniture as a result
of a chemical reaction.
»
Open up the battery compartment at the rear of each lamp by
turning it slightly to the left.
»
Put in 3x AAA batteries. Please take care of the correct
polarity.
»
Put on the cover of the battery compartment again and turn it
slightly to the right until all three hooks are fastened.
»
Take off the mounting bracket from the rear of the remote
control.
Summary of Contents for 701755
Page 2: ...2 A B C 1 4 6 3 5 3 D...
