User Manual
X
ORAYA
D
ATACUBE
-N3
7
Disk detected LED (A)
Illuminates blue when the connected X
ORAYA
RSU is in its fully pushed-in position.
Disk active LED (B)
Illuminates yellow when data is transferred.
Power button (C)
When the D
ATACUBE
-N3 is on, the power button illuminates green. Press the button twice
shortly to safely shut down the D
ATACUBE
-N3 and unlock the X
ORAYA
RSU.
Unlock button (D)
To avoid data loss, always press this button for at least one second before disconnecting the
X
ORAYA
RSU. The integrated LED displays the connection state.
LED
Meaning
red: connection enabled (locked)
green: connection disabled through button (unlocked)
Power input (E) and power switch (F)
Use the provided power cord to connect the D
ATACUBE
-N3 to a suitable power source.
Technical data of the built-in power supply:
Power: 650 W
Input: 100 – 240 V AC, 50 – 60 Hz, 8 – 4 A
Service LAN port (G)
In case of errors, this port is used as a debugging interface by the X2E support team.
USB 2.0 (H) and USB 3.0 ports (I)
Perform a firmware update by using a USB flash drive containing the suitable ISO file.
