User Manual
UPoB
16
COM interface
Connect the COM breakout cable to COM
(J)
.
Connect the desired connectors of the COM breakout cable to the corresponding de-
vices.
Tighten all connector screws.
Voltage output
Connect V
out
and GND
(F)
to the connected system, such as a X
ORAYA
data logger.
Voltage input
Requirements for the DC power supply
A 12 V DC power supply must provide a current of 6 A.
This applies to a charge current of 0.5 A. For a higher charge current, a
more powerful power supply is required.
Connect the power cable to V
in
(A)
.
Tighten the connector screws.
Connect the black connector of the power cable to 0 V or ground.
Connect the red connector of the power cable to a DC power supply in the specified
range.
Turn on the power supply.
The UPoB indicates its readiness by illuminating the On-LED.
