User Manual
UPoB
13
Reset (G)
This button covers the following functions:
restart the UPoB
acknowledge overcurrent event and reactivate voltage output
if connected via service interface
(I)
, switch the UPoB into bootloader mode to per-
form a firmware update (further information in the corresponding chapter)
CAUTION
Device damage due to sudden voltage drop
Pressing the reset button deactivates the voltage output for a short period of
time. The connected system can be damaged or destroyed due to the sud-
den voltage drop.
Shut the connected system down safely before pressing the reset
button.
Discharge (H)
This button discharges the capacitors. The Status-LED indicates the current status of the dis-
charging process.
Discharge restriction
The discharge button is deactivated in sleep mode and when input voltage
or output current is present. An already started discharge process stops
when input voltage or output current is registered.
CAUTION
Device damage due to overheating
Discharging at high ambient temperatures can destroy the UPoB.
Press the discharge button only at room temperature.
