Trim
to
crop
marks
Trim to crop marks
Your camera is ready to go out of the box! Follow these
steps for a quick setup of your new Camera system.
You should have: a camera and its power supply; a
wireless video receiver and its power supply; and a
video cable.
Basic Camera Setup
Connect the camera to power.
Plug the camera’s power supply into a standard wall
outlet. Plug the other end into the camera. Remove
the protective cover from the camera’s lens.
Connect the wireless video receiver to power.
Put your video receiver in a convenient place near or
on your TV. Plug its power supply into a standard wall
outlet and the other end into the video receiver.
Basic Camera Setup, cont.
Connect the video receiver to your TV.
Connect the video cable into the video-out jack
on the video receiver and into the video-in jack on
your TV.
Recording with a VCR
You can confi gure your XCam2 camera so that you can
record its video signal on your VCR. It’s easy:
1. Make sure your VCR is connected to play back on
your TV.
2. Set up your camera according to the instructions in
steps 1 thru 7.
3. Connect the video cable from the video receiver into
the Video In jack on your VCR.
With the camera connected to the VCR, you will be
able record surveillance video while watching on your
TV. Check your VCR owner’s manual if you aren’t sure
how to select the camera as the video source.
Options, cont.
Multi-Camera Systems
How does it work?
XCam2 cameras are designed so that you can use more
than one camera together with one wireless video
receiver. You select different cameras using a remote
control. The cameras should be set in groups of four,
i.e., A1, A2, A3, and A4, or A5, A6, A7, and A8. You
change the setting by turning the dials on the camera’s
power supply. Ensure all of your cameras are set to the
same Housecode, e.g. A.
Setting Up Multiple Cameras
1. Get together the parts of your multi-camera system:
the cameras and power supplies, video receiver and
power supply, video cable, transceiver module, and
camera remote control.
2. Set up your fi rst camera and your video receiver
according to the instructions in steps 1 thru 7.
3. Plug in the transceiver module and extend the
antenna.
4. Remove the battery cover and
put four AAA batteries into the
remote. Make sure to match the
batteries to the + and – marks
inside the battery case.
3
4
7
8
Trim
to
crop
marks
Trim
to
crop
marks
Trim to crop marks
Fold
Fold
Fold
Fold
Trim
to
crop
marks
Unpack these items.
