2 1
2 1
2 1
2 1
2 1
2 0
2 0
2 0
2 0
2 0
W
W
W
W
W
ARRANTY
ARRANTY
ARRANTY
ARRANTY
ARRANTY
12 MONTH LIMITED WARRANTY
12 MONTH LIMITED WARRANTY
12 MONTH LIMITED WARRANTY
12 MONTH LIMITED WARRANTY
12 MONTH LIMITED WARRANTY
X10.com, a division of X10 Wireless
Technology, Inc. (X10) warrants X10 products
to be free from defective material and
workmanship for a period of one (1) year
from the original date of purchase at retail.
X10 agrees to repair or replace, at its sole
discretion, a defective X10 product if returned
to X10 within the warranty period and with
proof of purchase.
If service is required
under this warranty:
Call 1-800-442-5065, visit www.x10.com,
or e-mail [email protected].
For help or more information on
setup, please visit:
http://www.x10.com/support
T
T
T
T
T
ROUBLESHOOTING
ROUBLESHOOTING
ROUBLESHOOTING
ROUBLESHOOTING
ROUBLESHOOTING
The Transceiver Module doesn’t
respond to the remote:
• Check the House Code on the
Transceiver Module is set to ‘A.’ If
you have changed the House Code
on the remote (see p. 16), check that
it matches the House Code on the
module.
• Make sure the X10 button is set to
code 999, see page 17.
• Press the ON/OFF button on the
front of the Transceiver to confirm it
operates the item connected to it.
The Transceiver Module works, but
other modules don’t respond:
• Check that the Module has the same
House Code as the Transceiver
Module.
• Try plugging the Module into a
different outlet.
Note: if you use an RF Transceiver (such
as the RR501 or TM751) to control X10
Modules, you will be able to control up
to 16 Modules. With a Transceiver,
when you press 1-6-ON you turn on
Module number 16. However, if you use
an IR543, when you press 1-6-ON you
turn on Modules 1 AND 6. The IR543
can only control 10 Modules (1-9 plus
0=10).
The Remote won’t control your A/V
equipment, or doesn’t work at all:
• Use manual controls or the original
remote control to confirm the
equipment is working properly.
• Be sure you pressed the device key
for the device you want to control.
• Reenter the code for your A/V
product from the code listings on the
separate sheet included.
• Try searching for codes as described
on page 13.
• Replace the Remote’s batteries.
