9
AK10A-01/00
8
AK10A -01/00
C
ONNECTING
U
P
H
OOKING
UP
THE
A
UDIO
S
ENDER
1. Connect the jack on the audio cable (supplied) to the audio out
jack on your PC's sound card (or other audio source).
2. Connect the red RCA plug to the socket labelled AUDIO RIGHT
and the white RCA plug to the jack labeled AUDIO LEFT on the
Audio Sender.
3. Plug the Audio Sender's Power Supply (the smaller of the two
power supplies) into a convenient 120 volt wall outlet and plug its
jack into the Audio Sender.
4. Position the Audio Sender in a convenient location such as on top
of the computer monitor and orient the antenna so that the flat
side points in the direction of the room where you will be
installing the Audio Receiver.
R
ECEIVER
2.4 GHz
Antenna
Power Supply
Jack
ON-OFF
Switch
(on side)
2.4 GHz Channel
Switch
(on bottom)
Audio Out
Jacks
P
CO M PUTE R
M O NITOR
AU D IO O U T
P C
AUDIO IN
AUDIO O UT
L EFT
RIGHT
DC 12V
