22
3
Maintenance
3.1
Cleaning
RadTarge II can be cleaned by wiping it with a damp cloth. Do not immerse RadTarge II in liquid as
the device is not completely waterproof.
3.2
Calibration
RadTarge II does not require user calibration to work properly. However, depending on the rules and
regulations of your industry, you may be required to regularly calibrate your equipment for quality
assurance purposes. Calibration may only be performed by X-Z LAB or an accredited calibration
laboratory.
3.3
Troubleshooting
Problem
Solutions
Unable to turn on
Check whether the power button was pressed for
longer than two seconds
Ensure the battery has been fully charged
Automatic shutdown
Ensure the battery has been fully charged
Insufficient power indicator on
Ensure the battery has completed charging
Charging indicator light not blinking
Ensure the MicroUSB cable is connected properly
Plug charging cable to a different USB port
Continuous alarm ringing
Confirm that a radiation source is nearby
Check alarm threshold settings
Alarm is not ringing near radiation source
Check alarm threshold settings
If the problems listed above cannot be solved, please contact X-Z LAB.
3.4
Warranty
RadTarge II comes with a one (1) year limited warranty for parts and labor. Cosmetic defects are not
eligible for repair. The device is not eligible for warranty if it has been subjected to improper use or
intentional damage.
While the device is still under warranty, users may purchase an additional year of coverage for 5% of
the product’s price. The warranty can be extended up to two (2) years
, totaling to three (3) years of
coverage past purchase date.
Devices past warranty may be sent in to X-Z LAB for repair. Rates for parts and labor will be
determined at the time of repair.
