- 9 -
MAINTENANCE
SOLDERING TIP CARE
1. For first use, allow the tip to rise to a stable temperature. Clean the
tip on the damp sponge and tin the tip (apply a small amount of
fresh solder to the tip).
2. The soldering iron should be run in the 330°C ~ 360°C range
for regular use, which is the normal temperature range for most
soldering applications. The heating element should last for 6 to 12
months depending on hours of use when the unit is regularly used
within this range.
3. Never hit the soldering iron or tip on anything when trying to
remove excess solder.
4. Do not use extreme temperatures with the soldering iron tips,
doing so will shorten the life span of the tip.
5. Clean the tip before each use, using the brass cleaning sponge for
better temperature stability during use.
6. Always clean and tin the tip after each use. This will aid in the
prevention of oxidation on the tip and help extend its life span.
7. Do not allow the soldering iron or the tips to sit idle at high
temperatures for extended periods of time.
8. Never use a file or other abrasive materials to remove oxidation
from the tips.
9. To remove oxidation, simply flood the tip with fresh solder and wipe
it clean on the damp sponge or copper cleaning pad. This may
need to be repeated several times for badly oxidized tips.
10. To remove the yellowing on the tip shaft (which is perfectly normal,
especially after first use) clean with 90% Isopropyl alcohol.
WARNING: Do NOT use anti-seize or any other lubricant on the tip
retainer or heater of the soldering iron
