background image

 

 

FUEL SAFETY 

 

Mix and pour fuel outdoors away from sparks and flames.

 

 

Use only a container approved for fuel.

 

 

Do  not  smoke  or  allow  smoking  near  the  scooter  while  working  on  the  engine,  or  while  the  engine  is 
running.

 

 

Wipe up and clean all fuel spills before starting the engine.

 

 

Move at least 10 meters away from where you fueled before starting the engine.

 

 

Stop the engine before removing the fuel cap.

 

 

It is recommended that you empty the fuel tank prior to shipping or storage to prevent any fuel leaks.

 

 

Do not store your scooter near open flames, furnaces, electric motors or switches.

 

 
MAINTENACE SAFETY 

 

Maintaining your scooter is recommended in this Owner’s Manual. 

 

Disconnect  the  spark  plug  cap  before  performing  any  engine  maintenance,  except  carburetor 
adjustments. 

 

Keep others away while making carburetor adjustments. 

 

Use only quality replacement parts as recommended by the manufacturer. 

 

TRANSPORTATION AND STORAGE 

 

Carry  your  scooter  by  the  handlebar  down  tube  with  the  engine  turned  off  and  the  muffler  away  from 
your body. 

 

Allow the engine to cool, empty the fuel tank and fold the scooter before carrying or storage. 

 

It is recommended that you empty the fuel tank prior to shipping or storage to prevent any fuel leaks. 

 

Clean the scooter carefully and store in a cool, dry place. 

 

PRODUCT SAFETY 

 

Keep hands and feet away from moving parts. 

 

Inspect the entire product prior to each use.  Replace damaged parts.  Check for fuel leaks and make sure 
all fasteners are in place and securely fastened. 

 

Replace all parts that are cracked, chipped or damaged before use. 

 

Use only parts and accessories that are recommended by the manufacturer. 

 

If a situation arises that is not covered in this manual, 

Proceed with caution and use good judgment. 

Contact your dealer or X-Treme (

www.x-tremescooters/support

) if you need further 

assistance. 

Summary of Contents for XG-575DS


















Reviews: