manualshive.com logo in svg

X-TREME XG-499, Product Handbook, Page: 2 / 28

Share
Download
X-TREME XG-499 Product Handbook Download Page 2

 

Page2 

                                                                             

 

THIS IS A 2-CYCLE ENGINE 

 

IT REQUIRES A MIXTURE OF GAS AND 2-STROKE 

ENGINE OIL 

 

1.  You 

must

  always  use  a  gas/oil  mixture.  FAILURE  TO  DO  SO 

WILL VOID YOUR WARRANTY! 

2.  Use 32:1 Gas/Oil Mixture.  4 oz. of oil for every gallon of High- 

Octane gasoline. 

3.  Tanaka Perfect Mix, or similar quality 2-Cycle Engine Oil is 
      recommended. Oil can be purchased from your local X-Treme 
      Dealer,  Outdoor  Power  Equipment  Dealer,  or  a  Power  Sports 

Dealer   

4.  High-Octane Fuel recommended. (90 octane or higher) 

               

 

This PRODUCT IS NOT INTENDED FOR EXTREME or 

OFF-ROAD Use! Please take care of your XG-499! 

DO NOT JUMP or ABUSE THIS PRODUCT! 

DO NOT RIDE IN WET/ICY CONDITIONS! 

Failure to follow these instructions will 

VOID YOUR WARRANTY! 

 

If you have any questions, please contact X-Treme customer 

service on the web at 

www.x-tremescooters.com 

 

IMPORTANT 

Failure to follow these INSTRUCTIONS will 

VOID YOUR WARRANTY! 

Summary of Contents for XG-499





























Reviews:

No comments