10
3.) WINDSHIELD INSTALLATION
Image 1
Image 2
Image 3
1.
Locate and remove the handlebar
bolt, washer & nut as on previous page..
2.
Remove 4 external screws & 2
internal screws from handlebar front &
back black covers for easy installation of
handlebar bolt.
3.
Slide handlebars over post in the
correct position, then insert the bolt &
concave washer into the front (speedometer
side) of the handlebars and secure with nut
on the back (riders side). Concave
washer should be partially inserted into the
handlebar and make contact with internal
post to be tightened properly and securely.
4.
Then, re-attach front and back
handlebar covers.
WINDSHIELD INSTALLATION:
1.
Locate windshield, metal clips (unless
already attached) rubber grommets &
screws. (image 1)
2.
Insert rubber grommets in windshield.
(image 2)
3.
Insert metal clips (unless already
attached) to front windshield fairing (7
total) (image 3 & 4)
4 Secure windshield to the front fairing
using
the
enclosed
screws,
rubber
grommets & clip nuts (5 each). Be sure to
screw into the clip nuts until snug & not
over tightened.
Summary of Contents for XB-700Li
Page 7: ...7 Product features ...
