9
NOTE:
If your charger does not look like the one illustrated, your unit has been
supplied with an alternative charger. The specifications and charging procedure
remain the same.
The charger has a small window with one LED or two LEDs to indicate the
charge status.
Chargers have built-in over-charge protection to prevent the battery from being
over-charged.
Charger will get warm during use. This is normal for some chargers and is no
cause for concern. If your charger does not get warm during use it does not
mean that your charger is not working properly.
WARNING! Failure to recharge your battery at least once a month may
result in a battery that will no longer accept a charge.
RIDING
1. Make sure all exposed bolts and screws are tightened.
2. Raise the kickstand to the upright position.
3. Push the on/off switch to the ON position.
4. Put one foot on the deck of the Metro Express while pushing off with the
other and gently rotate the Throttle Grip on the right side of the handlebar. The
scooter will begin to move.
**Your Metro Express scooter has variable speed control. You can control the
speed of your scooter by the amount of pressure you use when rotating the
throttle control. The more you rotate the throttle, the faster your scooter will go.
STOPPING & BRAKING
To brake, release the Throttle Grip and depress the Brake Levers on the right &
left side of the handlebars. Depressing the brake will disengage the power to
