4. Basic phone operation of VATA2024 two-port
gateway
Since there are two FXS interfaces on the VATA2024 two-port gateway, and the two
interfaces are independent, so the phones under the FXS1 and FXS2 have the
same operation. The phones under the two ports can be used as two separate
telephones at the same time. The following operations are applicable to the
phones under the FXS1 and FXS2.
4.1. Call transfer
Blind Transfer
During a call, press FLASH (Flash) key, enter the number to be transferred
【
*
】
add
and press
【
#
】
key to confirm, you can transfer the current call to third parties. (To
use this feature, you must enable the gateway of the Call Waiting and Call Transfer
function)
Attended Transfer
During a call, press FLASH (Flash) key, enter the number waiting to be transferred
connected, directly hang up, you can transfer successfully. (To use this feature,
you must enable the gateway of the Call Waiting and Call Transfer function)
NOTE:1, Call Transfer must call in two cases all the way is free for operation;
2, Gateway (transfer side) and the establishment of phone A calls phone C gateway
and then create a call, hang up the phone A, this time the gateway can also initiate
the transfer.
3, your VoIP traffic services providers need to support (RFC3515), this feature to
work correctly.
4.2. Call hold
Call Hold and set aside
During a call you can press FLASH (FLASH) button and enter the number to dial
and press
【
#
】
key to ensure
Recognition, can retain the current state of the call with third-party calls. If you
press the FLASH (Flash) key, you can switch back. You also can send and receive
on one side, then the party can not be retained to hear your conversation, the
speaker you can not. During a call if you press
【
*
】
operation, will enter the three-
