11
Copy Sensor
Many OEM Sensors have the Sensor ID printed on the sensor housing. The ID may be
formatted differently depending on the sensor. The ID will contain between 7 and 10
digits and will either contain all numeric characters or alphanumeric characters [0-9 A-F].
Manual Input
1. Select Vehicle in Pro+ Tool
2. Highlight and Select Copy Sensor
3. Press ENTER
4. Highlight INPUT SENSOR ID and
Press ENTER
Manual Input Continued...
(Input Sensor ID)
5. Select Input ID and Press ENTER
6. Use ARROW Buttons to Select
Characters and Press ENTER to
Select Each Character
(Input ID)
7. Place Blank Smart Sensor in
Cradle and Secure Thumb Latch
8. Press ENTER
9. Tool Will Program Sensor
10. Tool Will Display ID
( Manual ID Input)
( Display Sensor ID)
OE ID LOCATOR: This feature may assist you in
finding the Sensor ID on the sensor housing.
There are many numbers on the sensor and it
can be challanging to find the correct one.
The ID will contain between 7 and 10 digits and
will either contain all numeric characters or
alphanumeric characters [0-9 A-F]. It will NOT
be the FCC-ID, IC or contain dashes.
