X-Stream CLEAN Volt XCMADD, Operation Manual

Page: 21 / 24

Copyright ©WESSOL, LLC
21.
TROUBLESHOOT
YOUR SPRAYER
PROBLEM POSSIBLE REASON(S) SOLUTION
Clogged pump / hose
/ gun / wand / nozzle.
Not rinsing tank / pump / hose /
gun / nozzle(s) with water after
use.
Rinse sprayer throughly with warm, soapy water after each use.
Dead battery
Defective charger
If the LED indicator lights do not turn on or only one red LED is on after being on charger for over 2
hours, test the charger using a multimeter. Replace if necessary.
Damaged lithium cells If the battery receives no reading from a multimeter, a replacement battery is needed.
Pump makes a sound
when sprayer is on
and output is limited
Clog in filter or nozzle Check filter or nozzles for clog. Using warm water, throughly clean the components.
Clog in pump Open the pump and clean. Contact Support for assistance.
Leak from sprayer
tank
Loose hose-pump connection Open cover plate and identify the hose clamps. Use a flathead screwdriver to tighten.
Damage on pump Replace the pump.
Damage on tank Replace the sprayer tank.