Step 1:
Lift the backrest(B) up, the lower
the backrest into the seat
brackets. Securely lock the flat
head bolts into both sides of the
seat(A).
Step 2:
Connect the cable between the
seat(A) and backrest(B). Make
sure the
terminal
is
fully
inserted. Then attach the Velcro
flap.
Step 3:
Open the Velcro flap of left
armrest(C). Attach the left
armrest to the seat using the
parts shown in the illustration.
Tighten the bolts(G) with Allen
wrench(J) provided.
Step 4:
Connect the cable between the
seat(A) and right armrest(D).
Make sure the terminal is fully
inserted.
Step 5:
Open the Velcro flap of right
armrest(C). Attach the right
armrest to the seat using the
parts shown in the illustration.
Tighten the bolts(G) with Allen
wrench(J) provided.
Step 6:
Attach the handle, please pay
careful attention to the drawing
to be sure you position it
correctly. Insert the bolt(H) and
tighten it with the Allen wrench(J)
provided. Push the plastic cap (F)
into the bolt hole to finish the
assembly.
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: 1 931 359 2603, In Europe, call +44 (0)845 468 0262
