SET UP
FUNCTIONS:
• Side control panel with volume, bass control, input jack and channel choice
• Back control panel with input and power jacks.
• Hardwood frame construction with dual layer foam cover for extra comfort
• Easy to clean heavy duty upholstery grade vinyl cover.
• Wireless audio transmission
READ BEFORE USAGE:
· Always make sure the backrest is locked before sitting in the chair
· Excessive use of audio equipment could lead to hearing loss
· Children under the age of 13 should not use this product without adult supervision.
· Strictly for indoor use-do not expose to direct sunlight, moisture or extreme temperatures
· If cover becomes wet, disconnect power immediately and don't use until completely dry.
· Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts you at risk
for injury or death from electrical shock.
· When using in wireless mode connect the audio cable to the RX. Do NOT connect the audio input directly to the Recliner or the
device will be DAMAGED.
· Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
· Do not mix old and new batteries.
· Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
· Where the main plug is used as the disconnect device, the disconnect device shall remain readily operable.
1. Lift the back and chair seat out of the carton.
2. Position the chair on the floor.
3. Follow the diagrams below to assemble the chair.
4. Review the set up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.
5. Locate the input panel at the back of the seat. When used in wired mode, make sure that the control panel is
not more than 9.84ft/3 meters away from the audio source and 6.56ft/ 2 meters away from power source.
6. Unpack the power adapter(DC 12V 2.5A) and connect it into the power outlet, then to the power jack on the back panel. (A13)
7. Press the power button and confirm that the power indicator light (A1) is on. In wireless mode, turn on the power(A14)
to the TX box, confirm that its indicator light is on, turn the switch to adjust the channel.
8. Follow the diagrams to connect the X Rocker to the audio source of your choice in wired or wireless mode.
9. Adjust the bass and volume levels to your preference---start enjoying.
Need Help? Email: [email protected] Web: www.thexrocker.com
Phone: 1 931 359 2603, In Europe, call +44 (0)845 468 0262
1
A
1
B
1
C
1
D
1
E
1
F
6
G
6
I
1
H
1
J
M6*50
M6*30
