7
Problem Topic
Explanation/Solution
User settings are corrupt.
Two causes for this error are erroneous values
being sent to the hub from a software
application, or a new version of hub firmware
has a different data storage structure than the
previous.
Clear out user settings with the “Factory
Presets Procedure”; see FAQ or user manual
for details.
Reset hub and see if “06” returns. If not
normal operation can resume.
Flashing
“06”
– Data
Storage Error – cont.
“06” returns even after
performing “Factory” Presets
Procedure”.
Either factory settings are corrupt or there is a
hardware problem with the hub. In either case
the hub must be replaced and serviced.
