RapidMatch
™
XI Spectrophotometer
8
The Circular multi-color LED located on the top of instrument provides visual
feedback on the status of a measurement and pressure sensors.
•
Green LED:
Indicates all three pressure sensors are activated properly
and a measurement can now be triggered.
•
Red LED
: Indicates one or more of the pressure sensors is not properly
activated or an error has occurred during a measurement.
•
White LED
: Indicates the instrument is being powered on or the power
adaptor is plugged in.
•
Off
: Indicates the instrument is in battery mode or off, not ready to
measure, or not in measure mode.
9.
Main Screen
When the instrument is powered-up, the main (top level) screen appears after
the diagnostics test is complete. Select the modes by tapping the icons
located on the display screen.
Add New Job:
This mode is the main mode of operation. Sample
measurements are taken, saved and analyzed in this mode.
Completed Jobs:
This function is used to view and delete stored jobs.
Open Jobs:
This function displays current jobs that have been downloaded
from the software and require measurements.
Settings Mode:
The settings mode is used to set and edit the instruments
configuration options, and to enter the calibration mode. The settings options
should be reviewed before you use your instrument for the first time.
Footer Bar:
Displays the calibration status, Wi-Fi connection (where
applicable), battery life status, and current time.
10. Battery Gauge
The battery gauge on the display depicts the current condition of the battery
pack.
Indicates the battery pack is fully charged.
Completed jobs
Add new job
Settings mode
Open Jobs
Footer Bar
