C i 6 1 S P E C T R O P H O T O M E T E R
26
NOTE:
If an error occurs during a measurement, try measuring the
sample again. If the error still occurs, refer to the Troubleshooting
section in the Appendices.
Renaming a Sample
The last measured sample can be renamed from the default timestamp if desired.
To rename a sample:
1.
Select the Edit icon
and tap the
Select
button.
2.
Tap the
Left
navigation button to move the highlight to the Enter Sample Name screen.
3.
Tap the
Select
button to highlight the first character position.
4.
Use the
Up
or
Down
navigation buttons to page through the alphanumeric list for the first
character of the name.
NOTE:
You can also use the navigation control to rapidly scroll through a list by touching the
control between the arrows and circle left or right.
5.
Tap the
Select
button set the first character.
6.
Tap the
Right
navigation button to move the two arrows to the next character space and tap
the
Select
button.
7.
Use the
Up
or
Down
navigation buttons as previously explained to set the character and tap
the
Select
button.
8.
Continue until all characters for the name are set.
Measure icon
This icon is used to edit the default
sample name if desired. Refer to
Renaming the Sample Name
section that follows.
Current project selected
Measurement number for the
selected project and timestamp
appear for each measurement.
