X-Rite 890, Operation Manual, Page: 43 / 52

C-1
A P P E N D I X C
Term Abbreviations
ALF Automatic Line Feed
ALL
Strip is one pass and may be read in either direction (strip measurement mode)
AXMT
Automatic Transmit
bal Printer Balance
baud
Varies unit of data transmission speed.
BLK
Black patch must be read first (strip measurement mode)
cal Calibration
c:I/O#1 Copal, I/O #1
c:I/O#2
Copal, I/O #2
cnfg
Configuration
COMP Compact
CTS Clear to Send
CYN
Cyan patch must be read first (strip measurement mode)
def
Default
del Delete
DEL
Delay (in configuration)
DPT
Decimal Point
f:TECOM Fuji, Tecom System
HD High Density patch must be read first (strip measurement mode)
k:C.A.P.
Kodak, Create a Print
k:SYS
2
5
→ 7
5
Kodak, Systems 25 through 75
k:TNetA Kodak, Technet A
k:TNetXT
Kodak, Technet XT
LANG
Language
MIN Minimum Density patch must be read first (strip measurement mode)
NRM Normal patch must be read first (strip measurement mode)
NUO 1-Pass
Normal/Under/Over in 1 pass
pap
Paper
PIN5 Pin5 of RS232 port can be set to Off, Busy, or CTS
p1 through p3 Page #1 through Page #3
p2a through p2d
Page #2a through Page #2d