2.2 Internegative Film Strips
•
Type 1 (4 x 5)
The "Type 1" interneg consists of a
Kodak Step Tablet No. 1A
cut between
steps 11 and 13, with the two halves
mounted side by side in a slide frame (see
illustration). Make sure that the full
length of the steps 11 and 13 show (i.e.,
not covered by the inside edge of the slide
frame).
This slide is then projected on to a 4 x 5
interneg such that each step is 1/2" wide.
Step 11 and 13 should begin
approximately 1/4" in from the edge of the
interneg.
Note:
Steps 1 and 21 can go off
the other end during projection - this is
OK.
Step 13
Step 21
Step 11
Slide Frame
Step 1
Some
Overlapping
Permissible
1/2"
Approx. 1/4"
Step 1
Step 21
Resulting Interneg
9
