X-Rite 552, Getting Started

Page: 7 / 20

5 5 2
S P E C T R O P H O T O M E T E R
5
Charge the Battery Pack
Only use the AC Adapter supplied or the optional battery
charger (X-Rite P/N 500CHG). The battery pack must remain
in the instrument at all times to operate.
Before initial “remote” use of the instrument, charge the
battery pack for approximately three hours. However, if
immediate use is required, the instrument can be operated
“tethered” to the AC adapter during battery charging.
To attach the AC adapter:
1.
Verify that the voltage indicated on the adapter complies
with the AC line voltage in your area. If not, contact
X-Rite or an authorized representative.
2.
Insert the small plug from the adapter into the power-
input connector on the instrument. (If you are using serial
cable SE108-92, you may insert the small plug into the
power connector at the end of the cable.)
3.
Plug the adapter into an AC wall receptacle.
Apply Power
The Battery switch—located on the bottom of the
instrument—turns the instrument off and on during battery
operation. When the AC adapter is attached, the instrument
remains on and the battery switch has no affect.
Battery Switch