background image

Limited Warranty 

Forcome (Shanghai)Co., Ltd  ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the X-power 

product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, 

for a period of two year from date of purchase. The foregoing warranty is valid only if the installation and use of the product 

is strictly in accordance with product instructions. There are no other warranties, express or implied, including the warranty 

of merchantability or fitness for a particular purpose. If the product does not comply with this limited warranty, Your sole and 

exclusive remedy is that We will, at our sole option and within a commercially reasonable time, either replace the product 

or product component without charge to You or refund the purchase price (less shipping). This  limited warranty is not 

transferable. 

Limitations on the Warranty 

This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result 

of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper 

maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of 

alterations made pursuant to product instructions and in a workmanlike manner. 

Obligations of Purchaser   

You must retain Your product purchase receipt to verify date of purchase and that You are the original purchaser. To make 

a warranty claim, contact your local distributor, identify the product by make and model number, and follow the  claim 

instructions that will be provided. The product and the purchase receipt must be provided to Us in order to process Your 

warranty claim. Any returned product that is replaced or refunded by Us becomes our property. You will be responsible for 

return shipping costs or costs related to Your return visit to a retail store. 

Remedy Limits 

Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty or any other 

warranty related to the product. We shall not be liable for: service or labor charges or damage to Your property incurred in 

removing or replacing the product; any damages, including, without limitation, damages to tangible personal property or 

personal injury, related to Your improper use, installation, or maintenance  of the product or product component; or any 

indirect, incidental or consequential damages of any kind for any reason. 

Assumption of Risk 

You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the 

product instructions is at Your own risk..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for 20805002

















Reviews: