7
Interfaces
Description
1. Antenna
The Wireless LAN Antenna.
2. Reset
Push continually the reset button 5 ~ 10 seconds to reset the configuration
parameters to factory defaults.
3. WAN
The RJ-45 socket allows WAN connection through a Category 5 cable. Support
auto-sensing on 10/100M speed and half/ full duplex; comply with IEEE 802.3/
802.3u respectively.
4. LAN
The RJ-45 sockets allow LAN connection through Category 5 cables. Support
auto-sensing on 10/100M speed and half/ full duplex; comply with IEEE 802.3/
802.3u respectively.
5. Power
The power jack allows an external DC +7.5 V power supply connection.
The external AC to DC adaptor provide adaptive power requirement to
theX-Micro WLAN 11g Broadband Router.
Installation
Step One – Power On X-Micro WLAN 11g Broadband Router
Connect DC 7.5V Power Adapter to X-Micro WLAN 11g Broadband Router and the wall power socket.
Notice: It will take about 55 seconds to complete the boot up sequence after powered on the
X-Micro WLAN 11g Broadband Router; Power LED will be active, and after that the WLAN
Activity LED will be flashing to show the WLAN interface is enabled and working now.
Step Two – Configure X-Micro WLAN 11g Broadband Router
1.
Connect your PC to LAN port for configuration setting
WLAN Broadband Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default
IP
Address
:
192.168.1.254
Default IP subnet mask
:
255.255.255.0
WAN
LAN
Power
Antenna
Reset
