7
BELT BUCKLE
To fasten the belt buckle, join the buckle upper elements and insert them into the
buckle until the buckle locks (a).
To unfasten the belt buckle, press the round button and slide the upper elements
out of the buckle (b).
BELT ADJUSTMENT
To adjust the belt length, move the belt towards a regulator located under protective covers.
LAP BELT ADJUSTMENT
To adjust the lap belt length, move the regulator towards a belt, regulator is hidden
under the protective cover.
SHOULDER BELT ADJUSTMENT
It is recommended that the shoulder belt position is adjusted based on the child’s
height. To change the shoulder belt position, insert the regulators through appropriate
holes located in the reclining seat.
STORAGE BACKET ASSEMBLY
To assemble the storage basket, slide the hooks into the mounting holes in the front
of the stroller (a). Then, attach the handles placed on the side of the basket on the metal
pins (b). Next, wrap the cloth flap located in the back of the basket around the frame,
and then fasten the snaps (c).
SEAT ASSEMBLY ON THE FRAME
To mount the seat on the frame, put the seat into the mounting sockets until the locks
are locked (a). Next, put the straps fastening the seat through the plastic leads located
on the sides of the frame (b, c). Then, put the fastening straps through the plastic rectangles
attached to the backrest adjustment belts (d).
SEAT DISASSEMBLY FROM THE FRAME
To disassemble the seat from the frame, slide out the fastening straps from the plastic
rectangles (a). Then, put the fastening straps through plastic leads located on the sides
of the frame (b, c). Next, pull the unlocking handle located in the bottom part of the
footrest and slide the stroller out of the mounting sockets (d).
CHILD SEAT INSTALLATION
To install the seat on a frame, use special adapters. Push the adapters into the frame fixing
slots until they lock (a). Then put the seat on by fixing it on the adapters (b).
Attention: Before use, check if the seat is properly fixed.
CHILD SEAT DISASSEMBLY
To remove the seat from the frame, pull and hold the unlocking handle located in the
rear of the seat. Holding the handle of the seat with the other hand, pull it from the
mounting sockets of the adapters. To pull the adapters out of the frame mounting slots,
press the unlocking buttons.
X-BAG LITE AND X-MUG HOLDER FIXING
X-Bag Lite and X-Mug cup holder can be fixed to the stroller guide using the fixing slots
shown in figure.
MOSQUITO SCREEN ASSEMBLY
The mosquito screen is in the pocket in the front of the basket. To mount the mosquito
screen, put it on the footrest and then on the canopy front. Then fasten the mounting
straps around the frame, as shown in figure.
12
13
14
15
16
17
18
19
20
21
22
ENGLISH
