X-IO Hyper ISE User Manual Download Page 139

Page: 139 / 178

Xiotech—Proprietary

160337-000 Rev D, 30 September, 2013

Page 131

Maintenance

ISE User Guide

d. Click

Browse

to locate and select the

upgrade.ue

file from the network location where the unzipped

upgrade.ue

file is saved. After selection,

upgrade.ue

replaces

none

opposite the

Upload File:

label.

Figure 93. MRC Firmware Upgrade Browse

e. Click

SUBMIT

(Figure 93 on page 131).

Click

The upload is about to begin

pop-up.

Figure 94. MRC Firmware Upload Confirmation

The

Upload / Upgrade Firmware

—

Upload in progress...

page appears (Figure 95).

Figure 95. Upload Progress

Do not refresh the page or click the browser back button. If needed, another browser window can be
opened to view other ISE Web-Mgt pages.

During the file upload step, the ISE checks the selected upgrade file to ensure compatibility with the hard-
ware and software currently in the system.

Summary of Contents for Hyper ISE



















































































































































































Search results

Summary of Contents for Hyper ISE

Reviews:

Related manuals for Hyper ISE

Brands by name

Popular brands

X-IO Hyper ISE, User Manual

Search results

Summary of Contents for Hyper ISE

Reviews:

Related manuals for Hyper ISE

Brands by name

Popular brands