Page 10
Advanced Programming Option 9
1)
Enter Mode 5.
See To Enter any Mode section.
2)
Press Advanced Programming Option 9.
Press key "9" which is defined in the
following table.
3)
Press All-Lights-On key.
Product confirms Option Number is entered.
4)
Press the Receive Level.
A number between 1 and 16 representing the voltage
receive level of the product. The default is "4" (50mV). The "1" key is 5mV, "7" is
125mV, "11" is 225mV, "14" is 300mV, and "16" is 350mV.
5)
Press All-Lights-On key.
The product stores new setting into memory.
6)
Press All-Lights-On key 3 times.
The product is transferred out of programming
mode and into normal operation.
Numbered Key on
Transmitter/Controller
Advanced Programming
Option
Default Setting
1
Soft Start
Enabled
2
All Lights On
Enabled
3
All Lights Off
Enabled
4
All Units Off
Enabled
5
Universal All Lights On
Disabled
6
Universal All Lights Off
Disabled
7
Universal All Units Off
Disabled
8
Master Scene Enable
Disabled
9
Receive Level
4
10
Remote Access
Disabled
ADVANCED PROGRAMMING OPTIONS
RESET TO DEFAULT SETTINGS
The following steps will return this product to its default settings as given on the next
page.
1)
Enter Mode 1.
See To Enter any Mode section.
2)
Press All-Units-Off key 3 times.
This will reset to factory defaults.
3)
Press All-Lights-On key 3 times.
The product is transferred out of programming
mode and into normal operation.
