DVD-688 Controller
DVD-688 Controller
Duplicator will start the operation instantly when any 2 of the 5 installed writers are
Duplicator will start the operation instantly when any 2 of the 5 installed writers are
ready (disc detected). The rest 3 writers will be idle.
ready (disc detected). The rest 3 writers will be idle.
Press MODE will change the setting and press GO to bring you to next setting.
Press MODE will change the setting and press GO to bring you to next setting.
6.1.2 Write Method
6.1.2 Write Method
This setting controls the writing methods of CD/DVD disc including “Disc at once” or
This setting controls the writing methods of CD/DVD disc including “Disc at once” or
“T
“Track at once”. “Disc
rack at once”. “Disc at once” will be
at once” will be the default setting. Some writers
the default setting. Some writers may support
may support
different writing methods. If the method selected is not supported, duplicator will
different writing methods. If the method selected is not supported, duplicator will
automatically switch to the other one.
automatically switch to the other one.
Press MODE will change the option of setting and GO to bring you the next setting.
Press MODE will change the option of setting and GO to bring you the next setting.
6.1.3
6.1.3 CD
CD Wri
Write Speed
te Speed
This setting controls the maximum CD writing speed of writers. Default setting is “
This setting controls the maximum CD writing speed of writers. Default setting is “ 32”
32”
which will use 32X write speed to write the
which will use 32X write speed to write the CD disc. The reason why it isn’t set
CD disc. The reason why it isn’t set to max is
to max is
that the CD-ROM readers in the market cannot access the master disc as fast as the
that the CD-ROM readers in the market cannot access the master disc as fast as the
write speed if the writ
write speed if the write speed reaches 40X or above. Sometimes maximum write speed
e speed reaches 40X or above. Sometimes maximum write speed
will cause high failure rate that may be due to poor CD
will cause high failure rate that may be due to poor CD quality or unstable CD writing in
quality or unstable CD writing in
high speed. If installed CD-ROM’s reading speed can reach higher
high speed. If installed CD-ROM’s reading speed can reach higher or even lower,
or even lower,
please increase or lower the CD writing speed manually to get higher successful rate in
please increase or lower the CD writing speed manually to get higher successful rate in
writing. Press MODE to change the option and GO to exit.
writing. Press MODE to change the option and GO to exit.
6.1.4
6.1.4 DVD
DVD Wri
Write Speed
te Speed
This setting controls the maximum writing speed of DVD writers. Default setting is
This setting controls the maximum writing speed of DVD writers. Default setting is
“MAX” which will use the fastest writing speed of writers.
“MAX” which will use the fastest writing speed of writers. Sometimes maximum writing
Sometimes maximum writing
speed may have higher failure rate that may be attributable to poor quality of DVD disc
speed may have higher failure rate that may be attributable to poor quality of DVD disc
or unstable writing under high
or unstable writing under high speed. Under this circumstance, please lower the write
speed. Under this circumstance, please lower the write
speed under this setting. Please note that this is not the problem of t
speed under this setting. Please note that this is not the problem of t he controller itself.
he controller itself.
There is also situation that un-authorized blank DVD disc will be locked and restricted in
There is also situation that un-authorized blank DVD disc will be locked and restricted in
some DVD writers to write at higher speed. This situation is not under Wytron’s control.
some DVD writers to write at higher speed. This situation is not under Wytron’s control.
Press MODE to change the setting and GO to exit.
Press MODE to change the setting and GO to exit.
6.1.5 CD-ROM Drive
6.1.5 CD-ROM Drive
CD-ROM drive can be
CD-ROM drive can be selected manually
selected manually. Default setting
. Default setting is “auto” and
is “auto” and the duplicator will
the duplicator will
select the CD/DVD-ROM drive automatically. The option will be in series like ATA1.0,
select the CD/DVD-ROM drive automatically. The option will be in series like ATA1.0,
A
AT
TA2.0, A
A2.0, AT
TA3.0, A
A3.0, AT
TA4.1, etc., The numb
A4.1, etc., The number shown depends on the de
er shown depends on the devices being
vices being
detected by duplicator itself when booting. The ATA1.0 means ATA device connected at
detected by duplicator itself when booting. The ATA1.0 means ATA device connected at
IDE#1 with master mode setting (0) on device. The ATA4.1 means ATA device
IDE#1 with master mode setting (0) on device. The ATA4.1 means ATA device
connected at IDE#4 and with slave mode
connected at IDE#4 and with slave mode setting (1).
setting (1).
Press MODE to change the setting and Go to exit.
Press MODE to change the setting and Go to exit.
Page 16 of 33
Page 16 of 33
