Wytron Technolog
Wytron Technolog y Co.,
y Co., Ltd.
Ltd.
6
6.
. S
Sub
ub--fu
func
ncti
tion
on
In main menu, press and keep holding down the MODE switch for more than five
In main menu, press and keep holding down the MODE switch for more than five
seconds till the da-da-da sound heard from the controller, the menu will be switched to
seconds till the da-da-da sound heard from the controller, the menu will be switched to
sub- menu and vice versa.
sub- menu and vice versa.
For BIOS version 3.40 or above and with 3-button control panel, the function in sub
For BIOS version 3.40 or above and with 3-button control panel, the function in sub
menu can be switched by either pressing the MODE or BACK button once at a time. By
menu can be switched by either pressing the MODE or BACK button once at a time. By
pressing the MODE button, the function will be switched forwardly and by BACK button,
pressing the MODE button, the function will be switched forwardly and by BACK button,
the function will be
the function will be switched backwardly.
switched backwardly.
6.1 Setup
6.1 Setup
As there are different settings und
As there are different settings under the setup function to control the du
er the setup function to control the duplicator’s
plicator’s
operation, we suggest using the original default settings for
operation, we suggest using the original default settings for optimal operation. Changes
optimal operation. Changes
should be made only when you are
should be made only when you are fully familiar with t
fully familiar with the setting. Also please be noted
he setting. Also please be noted
that the function settings listed below are summary for
that the function settings listed below are summary for all possibility of devices installed
all possibility of devices installed
and might not exist
and might not exist in your duplicator.
in your duplicator.
For BIOS version 3.40 or above, the way of changing value for specific setting in Setup
For BIOS version 3.40 or above, the way of changing value for specific setting in Setup
has been changed slightly: When the Setup function is
has been changed slightly: When the Setup function is shown on the LCD display,
shown on the LCD display,
please press GO button to enter and thus you are at setting menu (At setting menu,
please press GO button to enter and thus you are at setting menu (At setting menu,
there is a greater (>) sign at
there is a greater (>) sign at lower right corner on the LCD display).
lower right corner on the LCD display).
Setting in setting menu can be switched by either pressing the MODE or BACK button
Setting in setting menu can be switched by either pressing the MODE or BACK button
once. By MODE button, the setting will be switched forwardly and by BACK button, it
once. By MODE button, the setting will be switched forwardly and by BACK button, it
will be switched backwardly. When value of
will be switched backwardly. When value of specific setting needs to be
specific setting needs to be altered, please
altered, please
press MODE or BACK button to
press MODE or BACK button to bring the specific setting shown on the
bring the specific setting shown on the LCD display and
LCD display and
then press GO button to enter. You will see at l
then press GO button to enter. You will see at lower right corner the asterisk (*) sign
ower right corner the asterisk (*) sign
which mean you are at value-changing mode for this specific setting. Press either the
which mean you are at value-changing mode for this specific setting. Press either the
MODE or BACK button to change the value and after changing, press the GO button to
MODE or BACK button to change the value and after changing, press the GO button to
exit. When the lower right corner is showing you the greater (>)
exit. When the lower right corner is showing you the greater (>) sign, it means you are
sign, it means you are
back to the setting menu.
back to the setting menu.
When all changing are done, please switch the setting to “Save setup” in setting menu
When all changing are done, please switch the setting to “Save setup” in setting menu
and press GO button to save the changing and leave the Setup function. Be noted, exit
and press GO button to save the changing and leave the Setup function. Be noted, exit
without saving the change via “Save setup”
without saving the change via “Save setup” (such as power off),
(such as power off), the value changing will
the value changing will
not be saved.
not be saved.
6.1.1 Start Writers
6.1.1 Start Writers
This setting controls the number of writer that will
This setting controls the number of writer that will work in duplicator and normally it
work in duplicator and normally it
should be equal to the number of writers installed in duplicator. Number of writers set is
should be equal to the number of writers installed in duplicator. Number of writers set is
less than that actually installed will limit the working writers. If
less than that actually installed will limit the working writers. If 5 sets of writer are
5 sets of writer are
installed, for example, number setting of 2 will allow using only two writers at
installed, for example, number setting of 2 will allow using only two writers at one time.
one time.
Page 15 of 33
Page 15 of 33
