Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit repair,
component replacement or complete product replacement in the event of malfunction. The decision to repair or replace will
be made by the manufacturer. This limited warranty only covers defects in materials or workmanship and excludes normal
wear and tear or cosmetic damage. Visit the product page located at
for additional information on this
product including important technical information not provided in this document and warranty terms & conditions.
Specifications
Copyright © 2017 WyreStorm Technologies |
TX-70-4K Quickstart Guide | 170804
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
4 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to all devices in the system and that they
are powered on.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
• Verify that the HDBaseT cable is properly terminated per the
section.
• Verify that the matrix, receiving device, and display support the output
resolution of the source.
• Refer to Video Resolutions in the
table for the max distance
based on resolution.
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K rated.
No or Intermittent Matrix or 3
rd
party Device Control
• Verify that IR cable(s) are properly terminated. See
• Verify that the IR emitter is located near the IR receiver on the device.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on the
device being controlled.
Power
Power Supply
Input: 100~240V AC 50/60Hz |
Output: 12V DC 2A
PoH
48V 15.4W
Max Power Consumption
26.5W
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%,
non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%,
non-condensing
Maximum BTU
90.42 BTU/hr
Dimensions and Weight
Rack Units/Wall Box
<1U
Height
24.9mm/0.99in
Width
220mm/8.67in
Depth
89.9mm/3.54in
Weight
0.52kg/1.14lbs
Regulatory
Safety and Emission
CE | FCC | RoHS
Audio and Video
Inputs
1x HDMI In: 19-pin HDMI type A female
Outputs
1x HDBaseT Out: 8-pin RJ-45 female
Audio Formats
2ch PCM | Up to DTS-X and Dolby Atmos
Output Video Encoding
HDBaseT Class A
Video Resolutions (Max)
HDMI
1920x1080p @60Hz 12bit (15m/50ft) | 16bit (7m/23ft)
3840x2160p @30Hz 4:4:4 8bit (7m/23ft) | @24Hz 4:2:0 HDR 10bit (3m/9.8ft)
4096x2160p @60Hz 8bit 4:2:0/4:4:4 (7m/23ft)
Using
Cat6
1920x1080 @60Hz 12bit (100m/328ft) | 16bit (70m/230ft)
3840x2160p @30Hz 4:4:4 8bit (70m/230ft) | @24Hz 4:2:0 HDR 10bit (70m/230ft)
4096x2160p @60Hz 4:2:0 8bit (70m/230ft)
Using Cat6a/7
1920x1080 @60Hz 12bit (100m/328ft) | 16bit (100m/328ft)
3840x2160p @30Hz 4:4:4 8bit (100m/328ft) | @24Hz 4:2:0 HDR 10bit (100m/328ft)
4096x2160p @60Hz 4:2:0 8bit (100m/328ft)
Color Depth (Max)
1080p: 12bit | 4K UHD: 8bit | HDR @24p: 10bit BT.2020
Maximum Pixel Clock
297MHz
Communication and Control
HDMI
HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, RS-232, and Ethernet
IR
1x IR TX 3.5mm (1/8in) TS Mono | Bidirectional over HDBaseT
1x IR RX 3.5mm (1/8in) TRS Stereo | Bidirectional over HDBaseT
RS-232
1x 3-pin Screw Down Phoenix Connector | Bidirectional over HDBaseT
Ethernet
1x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | Bidirectional over HDBaseT
