Copyright © 2021 WyreStorm Technologies |
WyreStorm.com
SW-540-TX-W User Manual | 210908
11 of 12
Technical Support: 844.280.WYRE (9973)
Display Control
The SW-540-TX-W is capable of sending both CEC and RS232 (RS232 for HDBT only) signals to a connected display
for power on/off.
CEC will use the default one-touch play and standby commands. These values will work with most major display
manufacturers. If you experience issues with one or both of these default commands not working, you can enter a
custom HEX value for both the Wakeup and Standby commands.
To send an RS232 string to a display over HDBT simply enter in the connection parameters along with the wakeup
and standby commands in the RS232 section.
These display commands can be triggered in two ways, either via hot plug detect when you connect a PC for the first
time or manually via an API command.
