IMPORTANT! Installation Requirements!
• Visit the NetworkHD product pages download section at wyrestorm.
com to check for the latest firmware, document versions, and WyreStorm
Management Suite configuration tools.
• Install the latest firmware onto all encoders and decoders using the
Maintenance Tool found in the Management Suite and via the NHD-000-
CTL web interface. Full firmware update instructions are included with the
firmware download.
• NetworkHD requires a Layer 2 managed switch network with support for
Multicast & IGMP snooping enabled.
• WyreStorm highly recommends using network switches listed in the
NetworkHD Switch Recommendation Guide.
These switches have been
verified by WyreStorm to meet the requirements of a NetworkHD system.
• Configure all network switches to the exact specification of the guides at
wyrestorm.com prior to connecting any NetworkHD devices.
• NetworkHD uses AutoIP to assign IP addresses in the range of 169.254.x.x
to encoders and decoders out of the box. Your PC must be set to an
address in this range in order to discover the encoders, decoders and
NHD-000-CTL.
• WyreStorm recommends the use of the NHD-000-RACK2 for installations
containing multiple NetworkHD devices. Use of this product provides an
enclosure to mount and secure all NetworkHD devices in a rack.
• If using a mix of HD & UHD resolution displays with differing HDCP versions
and for HDMI 1.4/HDCP 1.4 displays – Ensure the decoder is set to HDCP
1.x by right clicking the unit in the NetworkHD Console and opening the
video settings option.
In the Box
1x NHD-400-TX or NHD-400-RX
1x 12V DC 1A Power Supply
1x Wide-band IR Emitter
1x Wide-band IR Receiver (30-50KHz)
1x 4-pin Phoenix Connector
2x Mounting Brackets
1x Quick Start Guide (This Document)
Additional Information
More information and required software can be found within the Download
section of the product page on
.
• Management Suite v1.1.0 or Higher
• NetworkHD Switch Recommendations
• NetworkHD Switch Mapping Worksheet
• NetworkHD Switch Configuration Guides
• NetworkHD Touch Installation Guide
• NetworkHD Touch User Guide
• Drivers for Popular Control Systems
Copyright © 2017 WyreStorm Technologies |
NHD-400-TX | NHD-400-RX v1 Quickstart Guide | 170728
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
Basic Wiring Diagram
Quickstart Guide
NHD-400-TX | NHD-400-RX v1
4K UHD IP JPEG2000 Streaming Encoder and Decoder
Wifi Router
Local Display
Personal Computer
NHD-400-TX
NHD-400-TX
NHD-400-RX
NHD-400-RX
NHD-400-RX
iPad with
NetworkHD Touch
NHD-400-TX
UHD Sattellite Box
Audio Distribution
Amplifier
UHD BluRay Player
NHD-000-CTL
Control System
Key
Digital Video/DVI/HDMI
Ethernet
IR
Analog Audio
