16
Technical support: [email protected] EMEA/ROW: +44 (0) 1793 230 343
RS232 CONTROL
Example:
Inputting bc + “enter” will feedback the current status of
all outputs, such as:
"s11\r\n" ,"s22\r\n" ,"s33\r\n" ,"s44\r\n" ,"s55\r\n"
,"s66\r\n" ,"s77\r\n" ,"s88\r\n".
Definition: Output 1 selects Input 1, Output 2 selects
Input 2 etc.
To read the current status of all outputs using the COM
debug software:
Launch the COM debug software.
Configure the COM settings.
x. LAN Control
The WyreStorm MX-0808-4K can also be controlled via
LAN over a network/web browser, offering integration
protocols and full compatibility with market leading control
systems such as AMX, Control 4, Crestron, RTI and
WyreStorm Enado.
Use a ‘straight through’ Ethernet cable for
switch/router connection and a ‘cross-over’ cable
for connection to a PC.
Using the incorrect cable will not damage your
equipment, but it may result in poor/no connection.
Make sure that your LAN cable is correctly
terminated and firmly connected to ports before
running the software.
For LAN control functionality the IP address of the matrix
needs to be obtained, which can be achieved a number
of ways:
Method 1:
Connect the matrix to a network via
good quality Ethernet cable and use a PC to scan the
local network to identify the IP address of the matrix using
third party software.
Method 2:
Use the software interface of the specific
router or switch being used to find the matrix connected
to it.
Method 3:
Use SmartSet GUI, which is available to
download from the WyreStorm website.
There is a simple switching interface via web page
embedded in the matrix LAN board, which can be
accessed by typing the obtained IP address into a web
browser.
NOTE
Supported browsers are Internet Explorer,
Chrome, Safari and Firefox - always ensure you are
running the latest version of your browser.
Your browser will direct you to a Web Log in page to
access the switching interface in your internet browser.
Enter the default password of ten zeros
‘0000000000’
and click to take you to the LAN
matrix controller screen.
The LAN matrix controller interface enables the selection
!
1
2
4
3
1
2