Wyrestorm EX-100-4K-PRO, Quick Start Manual

Page: 4 / 4

Copyright © 2015 WyreStorm Technologies | wyrestorm.com
EX-100-4K-PRO Quickstart Guide | 160412
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair
or replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship
and excludes normal wear and tear or cosmetic damage.
Visit the product page located at wyrestorm.com for additional information on this product including important
technical information not provided in this document and warranty terms & conditions.
4 of 4
Dipswitch Settings
The dipswitches on the front panel configure various functions within the
EX-100-4K-PRO.
Note:
• Switches that are greyed out can be in any position for the desired
function.
RS-232
Passthrough RS-232 Firmware
Update
USB Host 1080p 5.1ch
Long Cable
Mode Disabled
1080p 7.2ch
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
1 2 3
Specifications
Audio and Video
Audio Formats 2ch analog and Up to 7.1 DTS-HD
Master Audio and Dolby True HD
Video Resolution 4096 x 2160p @ 60Hz 4:2:0
1920 x 1080 @ 60Hz (1080p60)
Color Depth 1080p: 48bit | 4K: 24bit
Maximum Pixel Clock 297 MHz
Communication and Control
HDBaseT HDCP | EDID | PoH | USB 2.0 |
Bi-directional IR and RS-232
HDMI HDCP | EDID | CEC
DVI/D supported with adapter (not
included)
Ethernet 10/100 Mbps auto-negotiating
IR Bi-directional over HDBaseT
RS-232 Bi-directional over HDBaseT
USB Local Host Control | Remote Host over
HDBaseT
Power
PoH 48V 15.4W
Power Supply Input: 100~240V AC 50/60Hz
Output: 12V DC 2A
Max Power Consumption 26.5W
Environmental
Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F ~ 140°F (-20°C ~ 70°C)
10% ~ 90%, non-condensing
Dimensions and Weight
Height 20mm/0.79in
Width 272mm/10.7in
Depth 99mm/3.89in
Weight 0.72kg/1.58lbs
Regulatory
Safety and Emission CE | FCC
RoHS Compliant
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is connected to the transmitter and receiving device.
If using a display with a built in receiver, verify that the device is
powered on.
Note: When using PoH, to power the transmitter, verify that the
HDBaseT cable is properly terminated per the
HDBaseT Wiring section.
• Verify that the transmitter, receiving device, and display support the
output resolution of the source. See Supported Video Resolutions .
• Verify that the HDBaseT cable is properly terminated per the HDBaseT
Wiring section.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
No or Intermittent 3rd party Device Control
• Verify that the IR cable(s) is properly terminated.
See IR Wiring
• Verify that the IR emitter is located near the IR receiver on the device.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable
to other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on
the device being control.