background image

 

The   lightning   flash   with   arrowhead   symbol   within   an   equilateral   triangle   is   intended   to   alert   the   user   to   the 
presence   of   uninsulated   “dangerous   voltage”   within   the   product's   enclosure   that   may   be   of   sufficient 
magnitude   to   constitute   a   risk   of   electric   shock. 

No   naked   flame   sources,   such   as   lighted   candles,   should 
be   placed   on   the   apparatus. 

WARNING:   The   terminals   marked   with   symbol   of   “+/-“ 
may   be   of   sufficient   magnitude   to   constitute   a   risk   of 
electric   shock.   The   external   wiring   connected   to   the 
terminals   requires   installation   by   an   instructed   person   or   the   use   of   ready   made   insulated 
leads   or   cords. 

Correct   Disposal   of   this   product.   This   marking   indicates   that   this   product   should   not   be 
disposed   with   other   household   wastes   throughout   the   EU.   To   prevent   possible   harm   to   the 
environment   or   human   health   from   uncontrolled   waste   disposal,   recycle   it   responsibly   to 
promote   the   sustainable   reuse   of   material   resources.   To   return   your   used   device,   please   use   the   return   and 
collection   systems   or   contact   the   retailer   where   the   product   was   purchased.   They   can   take   this   product   for 
environmentally   safe   recycling. 

Keep   your   packaging!   It   is   custom   made   for   your   unit   and   will   effectively   protect   it   for   possible   future   use. 

Be   sure   to   register   your   product.   It   is   very   important   to   complete   the   warranty   registration   form   located   on 
our   website.   Complete   and   submit   the   form   within   30   days   of   purchase   to   activate   your   warranty.   

 

 

FCC   Warning 
This   equipment   has   been   tested   and   found   to   comply   with   the   limits   for   a   Class   B   digital   device,   pursuant   to   Part   15   of 
the   FCC   Rules.   These   limits   are   designed   to   provide   reasonable   protection   against   harmful   interference   in   a   residential 
installation. 
 
This   equipment   generates,   uses   and   can   radiate   radio   frequency   energy   and,   if   not   installed   and   used   in   accordance 
with   the   instructions,   may   cause   harmful   interference   to   radio   communications.   However,   there   is   no   guarantee   that 
interference   will   not   occur   in   a   particular   installation.   If   this   equipment   does   cause   harmful   interference   to   radio   or 
television   reception,   which   can   be   determined   by   turning   the   equipment   off   and   on,   the   user   is   encouraged   to   try   to 
correct   the   interference   by   one   or   more   of   the   following   measures: 

Reorient   or   relocate   the   receiving   antenna. 

Increase   the   separation   between   the   equipment   and   receiver. 

Connect   the   equipment   into   an   outlet   on   a   circuit   different   from   that   to   which   the   receiver   is   connected. 

Consult   the   dealer   or   an   experienced   radio/TV   technician   for   help. 

 
Caution:   Any   changes   or   modifications   to   this   device   not   explicitly   approved   by   manufacturer   could   void   your 
authority   to   operate   this   equipment. 
 
This   device   complies   with   part   15   of   the   FCC   Rules.   Operation   is   subject   to   the   following   two   conditions:   (1)   This 
device   may   not   cause   harmful   interference,   and   (2)   this   device   must   accept   any   interference   received,   including 
interference   that   may   cause   undesired   operation. 
 
The   device   has   been   evaluated   to   meet   general   RF   exposure   requirement.   The   device   can   be   used   in   portable 
exposure   condition   without   restriction. 

 

©   Wyred   4   Sound.   All   rights   reserved.  

STI-v2   Manual   v1

 

 

Summary of Contents for STI-1000 v2















Reviews: