Powering Your DAC
When a power cord is connected to the AC input and the rear switch is turned on, the DAC is ready to be turned on.
Use the Power button on the front to turn the DAC on or put it into a low-power “standby” mode (display will be off).
Leaving the rear switch in the on position will keep power supplied to the DAC. Turning the rear switch off
disconnects all power.
Setup Menu
The extensive Setup Menu gives the user many options to configure your DAC. To enter the Setup Menu, ensure the
DAC is in standby mode (the rear switch is on but the DAC is not powered on with the front Power button).
1.
Push and hold the Up and Down buttons and simultaneously push the Power button, then release all three.
The Setup Menu is now shown on the display (you will see the first menu item, “IIR BNDWITH”).
2. Once the menu is activated, you can use the Up and Down buttons to scroll through the menu.
3. When an item is displayed that you wish to adjust, press the Power button quickly (do not press and hold or
the unit may turn off) to enter that item and use the Up or Down arrows to scroll through item options.
When the desired option is displayed, press the Power button quickly again to save the selection and return
to the main menu.
4. When finished, press and hold the Power button while in the main menu. The unit will go back in standby
mode and your changes will be ready for use the next time the DAC is powered on.
Default Reset: Should you wish to reset all menu items to factory default settings, first power the unit off front panel
Power button. Next, push and hold the Up and Down buttons while pressing and holding the Power button. This is
similar to the procedure to enter the Setup Menu, except you will continue to hold all three buttons in for a few
seconds. You will then see “----RESET----” on the display, at which point you can release all buttons. Once the
screen goes blank, the reset has been applied and all settings are restored to their factory configuration.
Setup Menu Tables for DAC-2v2 and 2v2SE are on the following two pages.
9
© Wyred 4 Sound. All rights reserved. DAC-2v2 & DAC-2v2SE Manual v2
