Front Panel Operation
The front panel of the DAC-2v2 series is a model of elegance, simplicity and efficiency. An LED display and three
simple buttons give the user a wealth of control and configuration options.
1.
LED display
The two-line LED display will show input and file information on the top line and volume information on the
bottom line (either the volume level or the word “FIXED”). The active line is indicated with a “—” on each
side. When a sample rate is displayed, the DAC is receiving and locked onto that rate. “< ? >” indicates no or
lost signal. When in the Setup Menu, the display will show menu items and settings.
2. Power button
When the rear switch is on, the Power button turns the DAC on or puts it in low-power standby mode.
When the DAC is powered on, tapping the Power button will toggle between top and bottom lines on the
display. When in the Setup Menu, the Power button is used to select and confirm options. We strongly
recommend putting the DAC in standby mode when not in use. This prolongs the life of DAC and display.
3. Down and Up buttons
Depending on which line is active on the display, use the Down and Up buttons to switch inputs or change
volume level (if set to “VARIABLE” in the Setup Menu). While in the Setup Menu, use the Down and Up
buttons to toggle through menu options
8
© Wyred 4 Sound. All rights reserved. DAC-2v2 & DAC-2v2SE Manual v2
